PPK processing
Turn raw GNSS recordings into centimeter-level positions. Add the rover's data and a base station's data for the same time, and get every position with its fix status, plots, and CSV, GeoJSON, or KML files. Works with RINEX, compressed CORS downloads, and common receiver logs.
Last updated: · Free tool by InsightSpatial
Private by design. This tool runs entirely in your browser. What you enter stays on your device. It is not uploaded to us or stored. Your GNSS files are processed on your device, however large, and are never uploaded.
Your browser cannot run this tool. Use a current version of Chrome, Edge, Firefox, or Safari.
How to process PPK data
- Record raw data on the rover. Set the receiver to log raw measurements (RINEX, or its own binary log), not only positions. Keep the antenna height.
- Get base data for the same time. Use your own base receiver on a known point, or a nearby station of the NOAA CORS Network (find one on the CORS map). Many states also run free networks.
- Add the files above, check the base position and antenna heights, and choose kinematic or static.
- Process and check the fix rate. Fixed solutions are typically within 1 to 3 cm. Download the positions as CSV for spreadsheets, GeoJSON for GIS, or KML for Google Earth.
Which files you need
| File | Accepted formats |
|---|---|
| Rover observations | RINEX 2 or 3 (.obs, .26o, .rnx); Hatanaka compact RINEX (.crx, .26d); or a raw receiver log (see below) |
| Base observations | The same formats. Several consecutive files from one station (for example hourly CORS files) are joined automatically. |
| Navigation (ephemeris) | RINEX 2 or 3 navigation (.nav, .26n, .26g, _MN.rnx). Raw logs usually contain it. For CORS data, NOAA publishes daily broadcast files (brdc). |
| Optional | SP3 precise orbits for long baselines; an ANTEX file (.atx) with antenna calibrations, such as NOAA's, to correct antenna phase centers |
Any file can be compressed as .zip, .gz, or .Z; the tool unpacks it in your browser.
Raw receiver logs: UBX, RTCM 3, SBF, NovAtel OEM, Unicore, BINEX, RT17, JAVAD GREIS, Swift SBP, SkyTraq, NVS, Hemisphere. Raw logs are converted to RINEX 3.04 first, and you can download the converted files.
Reading the results
- Fixed: carrier phase ambiguities resolved. Typically 1 to 3 cm.
- Float: not resolved yet. Typically 10 cm to 1 m; better the longer the receiver has tracked the same satellites.
- Single or DGPS: no usable carrier phase comparison with the base. Typically 0.5 to 5 m.
A fix rate above 90% on a moving rover is a good result. Gaps of float or single solutions usually come from trees, buildings, or a lost satellite lock. The estimated errors (sd columns) are statistics from the processing and are usually optimistic.
A fixed solution can still be wrong. Now and then the software settles on the wrong whole number of wavelengths, and those positions are labeled fixed but are off by decimeters or more. This is more likely on a moving rover, with long intervals between records (15 or 30 seconds), with a distant base, and under trees or near buildings. The default filter direction (forward and backward, combined) already turns a fix into float where the two passes disagree, but it cannot catch every wrong fix. To check your results:
- Look for jumps in the height plot and the track. A fixed position that suddenly moves by more than a few centimeters is suspect.
- Start or end the survey on a point with known coordinates, and compare the processed position with them.
- Measure important points twice, at least an hour apart, so the satellites are in different places.
Base coordinates, heights, and datums
Results are only as accurate as the base position. For a CORS station, use the coordinates NOAA publishes for its antenna reference point (ARP) and an antenna height of 0. In the NOAA CORS files we checked, the position in the file is that published NAD83(2011) antenna reference point, so the first option works for them.
Heights are ellipsoidal. To get elevations above sea level (NAVD 88), or to change datums or epochs, use NOAA's NCAT. For a single point that must be tied to the national network, OPUS is a free alternative that chooses the CORS stations for you.
PPK or RTK?
RTK gives centimeter positions on the spot, which you need for staking out or layout, but it needs a live correction link. PPK needs no link in the field and can recover from short outages, because it processes forward and backward in time. Many surveyors record raw data during RTK work as a backup. Our page on RTK corrections and NTRIP explains the live option.
Credits
Processing uses RTKLIB (demo5 b34L), open-source GNSS software by T. Takasu with improvements by rtklibexplorer, compiled to run in the browser. Compact RINEX files are decompressed with RNXCMP by Y. Hatanaka (Hatanaka, Y. 2008, A Compression Format and Tools for GNSS Observation Data, Bulletin of the Geospatial Information Authority of Japan, 55, 21–30). The sample data is from the NOAA CORS Network (stations SEAT and SSHO, October 27, 2026).
RTKLIB license
Copyright (c) 2007-2020, T. Takasu, All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Questions
What is PPK?
Post-processed kinematic positioning. A receiver records raw satellite measurements in the field, and a base station records at the same time on a known point. Afterwards, software compares the two recordings to cancel most errors, which gives positions within a few centimeters. RTK does the same comparison live over a radio or internet link.
Are my files uploaded?
No. The processing engine runs inside your browser, on your device. Files are read from your disk into the page and never sent to us or anyone else. Closing the page discards them.
How far can the base station be?
For centimeter results, keep the base within about 10 to 20 km (6 to 12 miles). The error grows by about 1 mm for every kilometer, and farther away the software needs longer to find a fixed solution. Beyond that, a moving rover often gets only float solutions.
What does "fixed" mean, and what if I only get float?
A fixed solution means the software resolved the exact number of carrier wavelengths to each satellite; it is usually good to 1 to 3 cm, though now and then a fix is wrong, so check the plots for sudden jumps. Float means it has not, and positions can be off by decimeters. To get more fixes, use a closer base, record longer with open sky, add satellite systems (Galileo, BeiDou), or lower the elevation mask slightly.
How long should I record a point for static processing?
With a dual-frequency receiver and a base within 10 km, 10 to 20 minutes usually gives a reliable fixed position. Single-frequency receivers need longer, often 30 to 60 minutes, and a closer base. For a point you need to tie to the national network, NOAA’s free OPUS service processes static data (15 minutes or more) against CORS stations for you.
Can I use a NOAA CORS station as my base?
Yes. The NOAA CORS Network publishes free data from stations across the United States. Download the station’s observation file for your day, plus the broadcast navigation file, and add them here. The station’s published coordinates are the base position.
Which receivers work?
Any receiver that records raw measurements as RINEX, and receivers that log UBX, RTCM 3, SBF, NovAtel OEM, Unicore, BINEX, and other formats listed on this page. A log of positions only (such as NMEA) cannot be post-processed.
Can this geotag drone photos?
Not yet. This tool produces the drone’s positions over time; matching them to camera shutter events is a separate step we may add later.